Switches, Pots, Transformers  

All prices are in New Zealand dollars and do not include GST, which is added at checkout.
Switches and Potentiometers

Flat Lever Toggle Switches.
Panel mount toggle switches featuring a flat paddle actuator. Threaded bush requires 6.35mm hole (1/4"). Supplied complete with dress nut. 4 styles available.

T100-SP1
Single Pole ON-ON
Our price $3.60 ea
Order
T100-SP3
Single Pole ON-OFF-ON (centre off)
Our price $3.95 ea
Order
T100-DP1
Double Pole ON-ON
Our price $4.55 ea
Order
T100-DP3
Double Pole ON-OFF-ON (centre off)
Our price $5.05 ea
Order

RK16 PCB Mount Potentiometers
A range of good quality 10% tolerance carbon track pots. Mounting thread is M7 (nuts and washers supplied), shaft is 6mm round at 25mm length (differs from picture). The reverse log tapers are difficult to find elsewhere.

RK16S-10K-A
10k ohms log taper single gang
Our price $3.00 ea Order
RK16S-10K-RD
10k ohms reverse log taper single gang
Our price $3.00 ea Order
RK16S-10K-B
10k ohms linear taper single gang
Our price $3.00 ea Order

RK16S-10K-B-DT
10k ohms linear taper single gang with centre detent
Our price $3.00 ea Order
RK16D-10K-B
10k ohms linear taper double gang
Our price $4.00 ea Order
RK16D-100K-B
100k ohms linear taper double gang
Our price $4.00 ea Order
RK16D-100K-RD
100k ohms reverse log taper double gang
Our price $4.00 ea Order

Flexiswitch Alps brand 2 pole (stereo) 3 position switch with contacts at the head (panel mnt) and at the remote slide switch operated by a steel ribbon 300mm length. 6mm shaft dia, M9 mounting bush. Surplus stock.
Our price $3.00 ea
Order

 

SW0144 Foot Switch As used in effects pedals. Single pole change over (SPDT) footswitch rated at 2A 250V. 3 pins.
Our price $6.40 ea
Order

SW0146 Foot Switch As used in FX pedals. Double pole change over (DPDT) footswitch rated at 2A 250V. 6 pins.
Our price $8.50 ea
Order
Audio Transformers
patx

PATX1:1 Line level 1:1 ratio audio transformer, offering good perfromance at low cost suitable for general isolation use. Solder direct to tags or use the BE77 PCB (to the right) to mount two transformers.
Our price $34.00 ea
Order

BE77 BE77 PCB suitable for mounting 2x PATX1:1 audio transformers.
Our price $9.50 ea
Order

ATC6820 1/4" jack socket to XLR3 female, high to low impedance convertor. Transformer coupled.
Our price $22.90 ea
Order

ATC6824 1/4" jack socket to XLR3 male, high to low impedance convertor. Transformer coupled.
Our price $22.90 ea
Order

ATC6822 1/4" jack plug to XLR3 female, high to low impedance convertor. Transformer coupled.
Our price $22.90 ea
Order

ATC6825 1/4" jack plug to XLR3 male, high to low impedance convertor. Transformer coupled.
Our price $22.90 ea
Order

ES11 Passive (no power supply required) transformer based audio isolator with 2x female RCA sockets one end and 2x male RCA plugs the other. Useful to remove hum and buzz between audio equipment including laptops.
Our price $32.50 ea
Order

Misc Items
patx

TN73 Panel mounting VU meter with Black Bezel. Scale area is 72x32mm. Hole cut-out dimension is 80x37mm. An external rectifier is required for operation if connecting directly to audio signal. Mounting kit included. See LED backlight option to the right.
Our price $38.00 ea
Order

BE88 PCB loaded with yellow LEDS used to back light the TN73 VU meter. Available in 4 different voltage ratings, it screws to the back of the VU.
Our price $18.50 ea
BE88-20V requires 20 volts DC
Order
BE88-25V requires 25 volts DC
Order
BE88-30V requires 30 volts DC
Order
BE88-50V requires 50 volts DC
Order

12000uF

12000uF 50V Nippon Chemicon hi-qualtiy power supply capacitor, useful for power amplifier power supplies. Surplus stock.
Our price $5.00 ea
Order

If you cannot find what you are looking for try a search or make an enquiry